Make

Plywood - Plain

0.240 inches 0.430 inches 0.730 inches

There are 5 images for this material

• Cut edges
• Pocketing
• Finish
• Sample
• Test cuts

What is it

Made of multiple layers of veneer, the outer layers are a paint-grade maple or birch and the inner layers are much courser and with alternating grain directions, leaving edges somewhat rough even though cleanly machined.

Orders using this material generally ship in 1 week. Find out more.

GET A SAMPLE

Design notes

Please read THINGS YOU MUST KNOW FOR CNC ROUTING before starting your CNC design. There is a lot of important info in there that you need to know to create correctly formatted design files.

This plywood has a thickness tolerance of +/-15% of the material thickness. The thickness is usually 1/32" to 1/16" less than the nominal thickness.

This plywood has a smooth face. Can have a tendency to bow or cup if not held flat, especially with the thinner sheets.

Some core voids and/or knots may be exposed during machining and are not considered defects. May have color variations and/or knots on occasion, especially on the back face. Strong and lightweight. Paints well.

Typical uses

Great for shelving, cabinets, fixtures, boxes, prototyping; often used with a solid wood strip, molding or edgebanding to cover the edges

Adhesives, joints & fastenings

Takes fasteners well but pre-drilling is recommended. Glues well with standard woodworking glues, hot melt or construction adhesive.